|
| |
When To Set The Hook
By Roger Lee Brown
“The Bass Coach”
How many times have you made a cast, reeled in your slack line, and then all of
a sudden you feel a bump, then BAM! You try to set your hook but you miss the
fish? Sound familiar? Trust me; this happens to anglers all the time. I can’t
tell you how many times this occurs, especially while observing my 3-day
students and charter clients. Most of them just can’t figure out why they keep
missing fish when they’re getting the strikes. Don’t feel bad if this sounds
like you, but I was also an angler that did exactly the same thing for many
years, in fact I was probably the worst at pre setting a hook.
Setting the hook to early and missing fish don’t just happen when fishing
plastics on the bottom either. How many times have you thrown a top water lure,
then all of a sudden a fish jumps on it and you JERK THE ROD! Just to miss the
fish again )-: hey, it happens all the time, especially on the surface because
it’s visual and probably the most exciting way to fish for bass.
There are certain times when using different baits that you want to set the hook
immediately, and then on the other side of the coin, there are certain times
when you don’t want to set the hook too quickly. In this article I will try to
help you understand a little more on the hook setting techniques when using a
variety of different baits.
Since top water fishing is the most exciting to most anglers I will start with
this type of fishing. One of my favorite top water baits happens to be a Zara
Spook. This bait is probably (in my own opinion) one of the best “big bass”
baits that has ever been made. Problem: Unfortunately, the only problem that I
use to have with this bait is that I would make a cast, watch it hit the water,
then as soon as it hit the water, immediately a fish would jump all over the
bait (before I even had a chance to start working it) and seeing this happen I
would immediately SET THE HOOK. Wow, I can’t even try to tell how many fish I
would loose by doing this.
Remedy: Now, after several years later and hundreds of fish missed by doing this
I finally realized what I was doing wrong. I was just too impatient and way to
quick on the draw when it came to setting the hook. I found that if you let the
fish take the bait and wait until you feel the pressure of the fish before
setting the hook you won’t loose a fraction of the fish that you would miss
otherwise. This technique will apply to most all top water baits including;
poppers, prop baits, floating worms, jerk baits (hard and soft), and the best of
all of course, the Zara Spook. Now, there is an exception to this rule if using
certain baits such as a buzz bait, sometimes frogs (while swimming), or any
action baits that you normally would work with a steady motion you would set the
hook quickly.
Next, we will cover the “in-between” (sub surface, but not bottom) types of
baits like the spinnerbait, crankbait, swimming plastics, and action baits.
First, let’s cover a crankbait. I have missed a good many fish in the past while
fishing a crankbait because I wanted to set the hook to quickly (nothing wrong
with that?), but what I didn’t realize was that I wasn’t using the right tool
for the application. What I mean when mentioning the right tool is that, I was
using a rod that was to stiff, and when I would try to set the hook I would
usually miss the fish because I didn’t have enough flex in my rod causing the
bait to break loose. You have to remember that most (not all) but most
crankbaits have little treble hooks, and these little treble hooks don’t allow a
lot of penetration. So after losing many fish over the years fishing crankbaits
I finally thought to myself “DUH! Use a more flexible rod” so I decided to get
myself a very flexible rod for fishing a crankbait with them little treble hooks
on them (they do make rods, especially for crankbaits you know) and the problem
was solved.
Spinnerbaits are a story of their own. When fishing a spinnerbait, keep in mind
that it (normally) has only one hook, and usually the hook is a big one. This
means that when fishing with a spinnerbait and using the “Chunk and Wind” (or
cast and retrieve) technique, when you feel a fish hit the bait you need to SET
THE HOOK! Quickly to penetrate the hook into the fish for a good hook set. The
best rod for this type of application would be a medium heavy action with some
backbone. When using lighter action rods with single hook baits the stronger set
the better because the lighter actions have much more flexibility and you need
to penetrate the hook as best as you can.. Now, most anglers prefer the “Chunk &
Wind” technique when using a spinnerbait, but what they don’t know is that a
spinnerbait can be worked at least six different ways (very successfully) than
just the “Chunk & Wind” technique. A couple of these techniques really don’t
require a very quick set, but again that’s another story.
When swimming plastic baits and using action baits with single hooks, again, use
a stiffer type of rod and set as soon as you feel a strike. Action baits along
with spinner baits and swimming plastics are all quick reaction bites and you
usually won’t get another chance to set once a fish grabs it.
Let’s move on to some of the bottom fishing baits. Plastic worms, crawls,
centipedes, just to name a few, are normally fished with single hooks either
Texas rigged, Carolina rigged, Mo-Jo rigged, Mo-Wak rigged (which happens to be
my own technique I came up with), the Drop Shot rig and the Wacky rig. This
means once again that you may want a stiffer type of rod and a good hook set
because of using the single hook. The best way I learned to successfully set the
hook using some of these baits is to let the fish pull a little pressure on your
line before setting the hook. This technique is where most of my former students
and charter clients have had the worst time catching fish because they had the
tendency to set very quickly as soon as they felt a bite. After teaching them to
reel in the slack and lifting the rod tip just putting enough pressure to feel a
fish, and then setting the hook, most of them have been much more consistent and
successful at catching instead of missing the fish. One very important thing I
must mention is that when lifting your rod tip for the feel of the fish, NEVER!
EVER! Tip the rod down and back up when setting the hook. This causes a quick
slack in your line and more times than not you will loose the fish by doing
that.
That’s enough for now, and I sure hope that this helps many anglers who have the
habit of doing what I used to when setting the hooks. The right way, the wrong
way, your way, which’s to say? All I know is that it has made a big difference
to me as well as many anglers who had the same problem as me in the past, and
now we’re all happy campers!
If you feel you may wish to learn more about bass fishing with my 3-day bass
fishing school, or just want to charter a day on the water, please feel free to
call me at (518) 597-4240 or go to my website at
www.basscoachfishing.com or just
drop me a email at rlbrown@capital.net
Until next time as always, take care & God bless!
“The Bass Coach” – Roger Lee Brown
|
